Keep your micro-truck rolling smoothly with this replacement Wheel Shaft and Pin Set. Designed specifically for the Rage R/C Mini Trek, these are the metal stub axles that pass through the steering knuckles (or rear hubs) to drive your wheels.
The wheel shaft is the final link in the drivetrain. It connects your driveshafts to the wheels themselves. If you have taken a hard tumble off a ledge and your wheel is wobbling badly, you have likely bent one of these shafts. This kit provides the factory-fresh steel replacements to eliminate the wobble and restore smooth rotation.
Key Features
-
Steel Construction: Machined from durable steel to withstand the torque of the Mini Trek's motor and the stress of climbing obstacles.
-
Direct Replacement: Exact factory dimensions ensure a perfect fit in the Mini Trek's bushings/bearings without slop or binding.
-
Includes Drive Pins: Comes with the tiny steel cross-pins that slide through the shaft to lock the wheel hex in place. (These are the most commonly lost parts during maintenance!).
Compatibility
This hardware set is designed specifically for:
-
Rage R/C Mini Trek (Micro Rock Crawler / Trail Truck)
What's Included
-
(2) Steel Wheel Shafts (Stub Axles)
-
(2) Steel Drive Pins
Installation Advice
Check Your Bearings/Bushings: When you remove the old bent shaft, take a moment to inspect the Bushings or Bearings that the shaft spins inside.
-
Clean the bushing area with a cotton swab.
-
Apply a tiny drop of light oil or marine grease to the new shaft before sliding it in.
-
This lubrication prevents the steel shaft from grinding against the knuckle, extending the life of your truck significantly.
