Don't let a lost wheel end your trail run. This is the genuine factory replacement set of Wheel Nuts for the Axial SCX30 platform.
On these tiny 1/30 scale crawlers, the nuts that hold the wheels on are incredibly small and easy to lose if you drop one in the dirt or carpet. This kit provides a complete set of spares for the entire truck, plus the specific tool needed to tighten them.
Key Features
-
Micro Size: Designed specifically for the ultra-small axles of the 1/30 scale SCX30. These are significantly smaller than the nuts found on the SCX24.
-
Full Set: Includes 8 Nuts, enough to replace every wheel nut on two trucks, or one truck with plenty of spares.
-
Included Tool: Comes with a specialized Micro Cross Wrench/Socket designed to fit these specific nuts. Finding a standard tool small enough for these can be difficult, so having the factory tool in the bag is a huge plus.
-
Flanged: The nuts feature a small built-in flange (washer) to distribute pressure evenly on the plastic wheel, preventing cracking.
Compatibility
This part is specific to the Axial 1/30 Scale Platform:
-
Axial SCX30 (All body styles: Jeep JLU, Bronco, etc.)
-
Note: These are TOO SMALL for the SCX24. Do not buy these for a 1/24 scale truck.
What's Included
-
(8) Micro Wheel Nuts
-
(1) Micro Wheel Nut Tool
Installation Advice
Finger Tight Only: These are tiny nuts threading onto tiny axles.
-
Use the Included Tool: The included wrench is sized perfectly.
-
Do Not Over-Tighten: Tighten the nut until it touches the wheel, then give it just a tiny "snug." If you crank it down, you will crush the plastic hex inside the wheel or strip the axle threads.
-
Check Frequently: Because they cannot be tightened very hard, these nuts can vibrate loose. Check them with the tool before every run.
