Illuminate the trail and add scale realism to your micro-crawler with this genuine Front & Rear LED Light Set. Designed specifically for the Axial SCX30 platform (like the Jeep JLU), this plug-and-play kit adds functional headlights and taillights to your rig.
Night crawling is a huge part of the RC experience, even in the micro world. This kit replaces the dummy stickers or empty buckets on your body with bright LEDs, allowing you to navigate obstacle courses in the dark and bringing your scale photos to life.
Key Features
-
Complete Lighting Solution: Includes both White LEDs (for headlights) and Red LEDs (for taillights) wired into a single harness.
-
Plug-and-Play: Features the correct micro-connector to plug directly into the Axial SCX30 ESC/Receiver unit. No soldering or external battery required; it draws power efficiently from the main truck battery.
-
Scale Look: The LEDs are sized to fit perfectly into the factory light buckets of the SCX30 body (often paired with the clear lens kit from the body accessories tree).
-
Simple Installation: Wires are cut to the precise length needed to route from the chassis to the body shell without leaving a messy nest of excess cable.
Compatibility
This kit is designed for the Axial SCX30 platform.
-
Note: The connector size and wire lengths are specific to the SCX30 electronics module. While it may physically light up if plugged into other systems, the voltage and plug type are tailored for the SCX30.
What's Included
-
(1) LED Light Harness (White Front / Red Rear)
-
Note: Does not include the plastic light lenses (those typically come with the Body Accessories Set).
Installation Guide
-
Mount the LEDs: Insert the LEDs into the light buckets on your body shell. You may need a tiny drop of Shoe Goo or hot glue to hold them firmly in place if the snap-fit isn't tight enough.
-
Route the Wires: Use tape or small zip ties to secure the wires to the inside of the body shell so they don't get snagged by the tires when the suspension compresses.
-
Plug In: Plug the connector into the port marked "LED" or "AUX" on your SCX30 ESC/Receiver combo.
-
Power On: Turn on the truck; the lights should illuminate instantly.
