The CD-5 Carbon Digital Dash Displays showcase a vibrant, daylight-readable screen encased in a robust, lightweight carbon fiber composite housing. At the top of the display housing, seven ultra-bright LEDs serve for RPM and shift light indication, allowing users to program them for ascending in specific RPM increments and flashing when it's time to shift. The brightness of the fixed color LEDs is customizable by the user. For convenience, two large buttons on the display face facilitate easy page changing and memory resetting, even when wearing driving gloves. These button functions are seamlessly integrated into the supplied rear connector, enabling users to mount remote buttons. Additionally, two programmable LEDs are positioned above the toggle buttons on the top of the housing on either side of the integrated LED shift lights.
VIEW AND LOG DATA FROM OVER 250 CAN DEVICES! The CD-5 Carbon seamlessly receives channels from two independent CAN bus inputs and requires no special modules to read AEM and/or third-party CAN signals. Validated to communicate with over 250 non-AEM devices, 2008-up stock ECUs via the OBDII port (see Supported Apps Tab), the CD-5 Carbon can be incorporated into any vehicle with the addition of our 22 Channel CAN Sensor Module. ECU CAN ready, it eliminates the need for external modules for CAN-to-CAN communication; just load your configuration and go! All channels can be named in virtually any language, ensuring that the displayed information makes sense to the user, whether on the main screen dashboard monitor or warning alerts.
Features:
- Full-color 5" screen with 800x480 resolution
- Direct sunlight readable (1000cd/m2 brightness and anti-glare filter)
- Layout files interchangeable with all versions of the CD-7
- Wiring interface/harness identical to the CD-7
- Rugged, lightweight flow-molded carbon fiber composite enclosure
- Total display weight of 11.7 oz./331 grams
- IP66 water resistance allows for operation in boats and motorcycles without worry
- Accepts channels from two separate user-programmable CAN bus connections - works with AEMnet enabled devices and non-AEM 3rd party devices side by side
- Plug & Play Adapter Cables available for Holley, Link, MSD Atomic and Vi-Pec ECUs
- Accepts channels from 2008-up factory ECUs using Plug & Play OBDII CAN Adapter Cable (PN 30-2217, sold separately)
- Install the CD-5 Carbon on carbureted and pre-2008 stock ECU-equipped vehicles using a 22 Channel CAN Sensor Module (PN 30-2212, sold separately)
- Available with or without 200Mb internal logging (up to 1,000Hz/channel)
- Available with or without on-board GPS receiver and antenna
- Add Vehicle Dynamics Module for GPS, 3-axis gyroscope and 3 axis accelerometer for G-loads, roll, pitch, yaw, track mapping and lap timing (PN 30-2206, sold separately)
- Seven programmable pages including four Main pages, Alarm, On-Change and Start-up pages
- Dedicated Alarm page quickly identifies problems, programmable in almost any language! (user-defined)
- Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc.
- Use included page layouts and input your channels and text, or create your own from scratch
- Free DashDesign Graphics Editor software
- Seven LED RPM/shift light indicators on top of the housing (programmable and dimmable)
- Two programmable LEDs
- Odometer function
- Over 200 supplied fully programmable SAE and custom warning icons, and you can add your own
- 'Headlight-in' connection dims the dash and LEDs during night operation
- Two extra switch inputs included for displaying user-triggered events (blinkers, high beams, etc.)
- User-supplied graphics can be changed based on channel values (up to the full screen size)
- Convert CAN bus channel values to user-defined text in multiple languages
- Local Pickup Available:
- No
- Local Delivery Available:
- No
- Additional Handling:
- No
