Here is a detailed product description for the 1RC Racing 1/18 Brushless Motor (8700Kv) with 12T Pinion (1RC7000).
Product Overview: 1RC Racing 8700Kv Brushless Motor
Part Number: 1RC7000
Unleash the full potential of your 1/18 scale oval racer with this high-performance 8700Kv Brushless Motor. Designed as the standard factory motor for the 1RC Racing brushless line, this unit provides the incredible RPM needed for competitive oval track racing.
Whether you are upgrading a brushed chassis to brushless specs or replacing a tired motor in your race rig, this 8700Kv powerhouse delivers snappy acceleration and blistering top speeds on 2S LiPo power. It comes pre-wired with bullet connectors and includes the specific 12-tooth pinion gear matched to the 1RC drivetrain.
Key Features
-
High RPM (8700Kv): Rated at 8,700 RPM per volt, this motor is tuned for high speed on small tracks. It provides the "punch" needed to shoot out of the corners and the top end to dominate the straights.
-
Micro Brushless Tech: Eliminates the friction and wear of traditional brushed motors. This means higher efficiency, longer run times, and zero maintenance (no brushes to replace).
-
Direct Fit: The motor can size and mounting hole pattern are engineered to drop perfectly into 1RC Racing motor mounts without modification.
-
Pre-Installed Pinion: Includes a 12-Tooth Pinion Gear already pressed or mounted, saving you the hassle of finding a micro-pitch gear that fits.
-
Plug-and-Play: Comes with 2mm gold bullet connectors pre-soldered, ready to plug into the 1RC 18A Brushless ESC.
Compatibility
This motor is the standard replacement for the Brushless Versions of the following vehicles:
-
1RC Racing 1/18 Sprint Car
-
1RC Racing 1/18 Midget
-
1RC Racing 1/18 EDM (Eastern Dirt Modified)
-
1RC Racing 1/18 Late Model
Important Upgrade Note
Are you converting a Brushed Car? If you currently have a Brushed motor (2 wires) and you want to install this Brushless motor (3 wires), you cannot use your stock ESC.
-
You must also purchase the 1RC Brushless ESC (1RC7002).
-
Plugging this motor into a brushed ESC will not work and may damage the electronics.
Specifications
-
Kv Rating: 8700Kv
-
Voltage Input: 2S LiPo (7.4V) Recommended
-
Pinion: 12T (Included)
-
Connectors: 2.0mm Bullet (Male)
