Radium Engineering PCV Catch Can Kit for 2017+ FK8 Type-R - 20-0424-FL

Installation Instructions

COMPATIBILITY
17-21 Honda Civic Type-R (LHD Only)
2023+ Honda Civic Type-R (LHD Only)

The catch can secures to the RH firewall with no modifications required (FK8 shown below).

This catch can runs inline with the PCV (positive crankcase ventilation) valve and retains it's factory function. When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV "check" valve closes and, thus, this hose experiences no flow. Conversely, the PCV hose will experience "metered" vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run. Note: No inline check valve is required since Radium catch cans are pressure sealed. This means a direct intake manifold connection is permitted.

The Honda Civic Type-R FL5 is shown above.

20-0825-FL Catch Can Kit, CCV, 2017+ Civic Type-R

COMPATIBILITY
2017+ Honda Civic Type-R

The catch can fits under the OEM engine cover with no modifications required. It secures to the RH motor mount. If an aftermarket motor mount is used, minor modifications may be required. This catch can runs inline with the crankcase vent port. At low loads it experiences atmospheric pressure, but when the engine is at high load (WOT), this line will experience high flow out of the crankcase. This would normally lead to oil and sludge accumulation in the air filter intake pipe. Oil accumulation will occur in the intercooler which lowers the thermal efficiency properties of the heat exchanger and leads to decreased performance.

The crankcase vent lines are routed over the engine and billet clamped to the turbo inlet pipe using temperature resistant metal tubes.

20-0826-FL Dual Catch Can Kit, 2017+ Civic Type-R

COMPATIBILITY
2017+ Honda Civic Type-R

For the ultimate in engine protection, RaceChoice recommends 20-0826-FL Dual Catch Can Kit, 2017+ Civic Type-R.  

This kit utilizes both the "CCV" and "PCV" catch can kits detailed above. It is designed for LHD vehicles.

Each kit features the following: 
-Anodized oil catch can with integrated condenser and dipstick
-Anodized aluminum Civic Type-R specific mounting bracket
-Anodized aluminum -AN adapter fittings and hose ends
-Enough PCV hose for custom applications  
-Stainless steel mounting hardware