Radium Engineering Fuel Rails for S197 Ford Shelby GT500 - 20-0320

Installation Instructions

COMPATIBILITY

This kit is compatible with the 2007-2014 (S197) Shelby GT500 with OEM returnless or aftermarket return fuel systems. 

OVERVIEW

Manufactured with a large internal bore, the fuel rails can support all necessary engine power requirements. They are CNC machined from solid 6061 aluminum, black anodized, and laser etched for a high quality surface finish. Like the OEM fuel rails, the injector bores are 14mm ID so factory injectors are permitted.

This kit offers a total of eight 3/4-16 (8AN ORB) threaded ports to allow plumbing of anciliary fuel system devices. In order to clear the supercharger's intake pipe, the LH fuel rail (shown above) features three ports. The lower center port for both rails are most commonly used for Radium Engineering fuel pulse dampers. The RH fuel rail (shown below) features all the ports from the LH side fuel rail with the addition of two top ports (5 total). The top front port is for the provided adapter that is used to mount the OEM fuel pressure sensor. The top rear port is commonly used for aftermarket fuel pressure monitoring.

This kit is compatible with all fuel types including popular alcohol mixtures such as E85.

FUEL INJECTOR COMPATIBILITY
This fuel rail is compatible with factory or OEM equivalent fuel injectors. If upgrading fuel injectors, consult your aftermarket injector supplier for details. Radium Engineering cannot specify any further injector dimensions other than stating ‘OEM equivalent’.

INCLUDED:

20-0320 Ford Shelby GT500 Fuel Rail Kit: 
-Black Anodized Laser Etched Aluminum Fuel Rails, RH
-Black Anodized Laser Etched Aluminum Fuel Rail, LH
-Ford Fuel Pressure Sensor 8AN ORB Adapter Fitting
-Stainless Steel Mounting Bolts (x4)

OPTIONAL:

20-0334-11 Fuel Rail Plumbing Kit, S197 Mustang
The plumbing kit allows for easy integration with the the OEM fuel system. Unlike others on the market, the kit does not reuse the awkward 180 degree feed line with the fuel rails fed in series. Instead, this kit eliminates any unnecessary fuel hoses that route over the top of the engine preheating the fuel. The kit plumbs the fuel rails starting from the OEM hard pipe near the firewall and feeds the rails in parallel for even fuel distribution with the use of our high flowing Y-adapter fitting. All hoses are high quality PTFE and are compatible will all fuel types including E85. Billet aluminum O-ring plugs are included for all unused ports on the fuel rail.